| |
 |
| |
|
|
Miron A Plus, Top-of-the-line Crosslinked Polyethylene Insulator, is ideal for the factory or buildings facing the heat problem severely. Better than Miron A 1, Miron A Plus enhances the efficiency of heat reflection with 8 micron pure Aluminium Foils on both sides. One side of Aluminium Foil will firstly reflect heat radiation, and Polyethylene Insulator in the middel will obstruct heat from conduction and convection. Finally, another side of Aluminium Foil will help for heat emissivity.
|
| |
| The superior qualifications of Miron A Plus |
- Highest Thermal Resistance (R-Value) 22 hr.ft2. ° f/Btu
- 95% Heat reflection & 5% Heat Emissivity
- The Lowest Thermal Conductivity (K-Value) 0.025 W/m.K
- Long Life using (more than 20 years) – depending on the installation
- Non-toxic for human
- Convenient to install with all types of structure such as roof, ceiling, including wall construction
- High Fire Retardance
- ~ 0% Water absorption
|
| |
| The Structure of Miron A Plus |
- Pure Aluminium Foil 8 micron
- Special Adhesive
- Plastic Film
- Crosslinked Polyethylene Insulator
- Pure Aluminium Foil 8 micron
|
|
| Physical Property Data of of Miron A Plus |
Reflectivity |
JIS R3106 |
95% + 95% |
Emissivity |
- |
0.05 |
| Thermal Conductivity |
ASTM C-177 |
0.025 W/m.k. |
Water Absorption |
JIS K6767 |
0% |
Surface Resistant |
ASTM-D267 |
2.0 ohms/sq. |
|
| |
| R-Value of Miron A Plus |
| M-PE |
Unit |
5 mm. |
10 mm. |
| R-Value |
m2.k./W |
3.69 |
3.87 |
hr.ft2. ° f/Btu |
21 |
22 |
|
| |
| Standard size for residential (DIY) |
| M-PE |
Size (W x L) |
| 5 mm. |
1.25 x 8 M. |
| 10 mm. |
1.25 x 4 M. |
|
| |
Standard size for construction project (Roll) |
| Thickness (mm.) |
Width (M.) |
Length (M.) |
| |
1.25 |
25 |
50 |
100 |
| 5 |
|
|
|
x |
|
| 10 |
|
x |
x |
|
| 15 |
|
x |
x |
|
|
| 20 |
|
x |
x |
|
|
|
