Aluminium Foil

Product Particular
M-PE Aluminium Foil is developed from M-PE Standard by enhancing 7 micron thick of Pure Aluminium Foil that can increase the efficiency of heat reflection. The structure of M-PE Aluminium Foil will provide the qualification of heat and light protection, more resistance and more effective heat protection that can be long life used.
 
The Structure of M-PE Aluminium Foil Insulator

1. Aluminium Foil
2. Special Adhesive
3. Plastic Film
4. Polyethylene Insulator

 

Material for laminated surface
M-PE Aluminium Foil is laminated the surface with 7 micron thick of Pure Aluminium Foil that has 95% heat reflectivity and only 0.05 heat emissibity, which provides full efficiency of heat reflection and heat resistance.
 
Product Utility
M-PE Aluminium Foil is qualified for house or building with high temperature problem that is particularly designed for roof construction (above purlin and rafter), including installing insulator to the wall.

Physical Property Data of Aluminium Foil

Reflectivity

JIS R3106
95% + 95%
Emissivity
-
0.05
Thermal Conductivity
ASTM C-177
0.029 W/m.k.

Water Absorption

JIS K6767
0%

Surface Resistant

ASTM-D267
2.0 ohms/sg
 
Number of resistance of heat transmission
M-PE
Unit
2 mm.
5 mm.
10 mm.
R-Value
m2.k./W
1.95
2.05
2.33
hr.ft2. ° f/Btu
11
12
13
R-Value : means resistance to heat flow (Under typical roof)
 
Reduction of heat transmission at 65 °c
M-PE
Unit
2 mm.
5 mm.
10 mm.
Temp.
°c
8 - 12
15 - 20
25 - 30
 
Reduction of heat transmission after insulator installation
M-PE
Unit
2 mm.
5 mm.
10 mm.
Redude.
%
68
69
71
 
Standard size for roof/ ceiling construction (Pack)
M-PE
Roof
Roof
Smooth Ceiling
2 mm.
1.25 x 20 m.
-
-
1.25 x 40 m.
-
-
5 mm.
-
60 x 60 cm.
0.90 x 8 m.
10 mm.
-
60 x 60 cm.
0.90 x 4 m.
 
Standard size for construction project (Roll)
Thickness (มม.) Width (m.) Length (m)
  0.90 1.00 25 50 100
5 x     x x
10 x x x x  
15 x x x    
20 x x x    
M-PE INSULATION© 2007
Home  |  Products  |  Installation   |  Reference  |   About Us