M-PE INSULATION

Air Flect Standard

Product Description

The structure of M-PE AIRFLECT Standard consists of 14 mm. thick of high effective Polyethylene Air Bubble, which is qualified for protecting heat transmission by utilizing inside air-gap method. It is laminated the top surface by Pure Aluminium Foil with 95% heat reflectivity and 0.05 heat emissivity and laminated the bottom surface by Metalized Film with 86% heat reflectivity that is qualified for protecting heat irritation to the bottom.

Physical Property Data of M-PE AIRFLECT Standard
PROPERTY	Unit	Dir	AIRFLECT STANDARD	STANDARD
Layer		1	Pure Aluminium Foil
		2	Polyethylene Air Bubble
		3	Metalized Film
Thickness	mm.		4.0 + 0.5
Nominal Density	kg./m3		9.0
Reflectivity	%	Upper	95	JIS R3106
Reflectivity	%	Upper	86	JIS R3106
Thermal Resistance (R-Value)	m2 °c/W		12.38 hr.ft2 0F/ Btu
Emissivity			0.05	ASTM C137
Surface Spread of Flame			Class 1	BS 476 Part 7
Tensile Strength	g/cm-W	MD	4137	ASTM D882
Tensile Strength	g/cm-W	TD	3566	ASTM D882
Elongation	%	MD	60	ASTM D882
Elongation	%	TD	36	ASTM D882
Tear Strength	gf	MD	12.4	ASTM D1938
Tear Strength	gf	TD	18.5	ASTM D1938
Usable Temp. Range	°c		-85 °c - 85 °c
Water Vapor Transmission	g/ft2hr		0.001
Standard Roll Size	m.		0.85 x 100
Maximum Width	m.		1.25 Having strip of Foil
Maximum Length	m.		100
Weight per sqm.	g.		100

The information contained in this Technical Data Sheet is the result of extensive laboratory testing performed on our products during standard production. The values given here are typical average values and are believed to be correct to the best of our knowledge

Airflect Standard, a heat reflectivity sheet, is made of high quality Polyethylene Bubble (10mm. diameter) coating one side with one side Pure Aluminium Foil (Reflectivity heat 95%) and Metalized Film (Reflectivity heat 86%) on another side. It is suitable for bulidings, factories, and residentials and available for installation with steel roof, ceramic tile roof or concrete wall. Since Airflect is light, it is convenience and easy to install.
Airflect Standard, is able to reflect heat up to 95% and does not restore heat. Moreover, it is water and moisture resistance, difficult for tearing, and has long life using more than 10 years. Standard size is 0.85 meter width and 50/100 meter length (42.5 / 85 sq.m. per roll)